This bundle consists of:
- Variant 1 = BAR Short Trigger Gun + CleanSkin 1/4" Quick Connect Spray Nozzle Tips (5 pieces) + Foam Lance
- Variant 2 = BAR Short Trigger Gun + CleanSkin 1/4" Quick Connect Spray Nozzle Tips (5 pieces) + Foam Lance + Foamstar 1L
We have put together an economical yet quality package which combines the most popular BAR short trigger gun rated up to 5000psi suitable for a wide range of high pressure washers that comes together with a 40 degree spray nozzle and the BAR Italian made foam cannon.
1) Short Trigger Gun
A high quality short gun that adapts to any pressure washer with the right fitting for added convenience of reaching tighter spots like underneath chassis or even the engine bay compartments.
This assembly comes complete with quality quick connect components that is even stronger and comes with a swivel connector at the water inlet for ease of manoeuvrability. All connections have been fitted with thread seal tape to prevent leaks and is ready for plug & play.
Manufactured in Germany
Connections:
Inlet: 3/8" Quick Connect Plug (with built-in 360 deg swivel)
Outlet: 1/4" Quick Connect Coupling
Specifications: |
Short Trigger Gun (Standalone) |
Inlet: |
3/8" Bsp Female |
Outlet: |
1/4" Bsp Female |
Flow: |
45 l/min. |
Pressure: |
5000 Psi (max. 5000 Psi) |
Temp: |
150°C |
The short trigger gun comes standard with a 3/8" QC plug exit. To integrate this kit with a M22 female hose connector which is standard across most pressure washers such as ones from Kranzle; you will need to purchase this adaptor which is a 3/8" QC coupling to M22 male thread adapter to suit.
2) CleanSkin 1/4" Quick Connect Spray Nozzle Tips (5 pieces)
1/4″ inch Universal Quick Connection Spray Nozzle Tips
- Red: 0°
- Yellow: 15°
- Green: 25°
- White: 40°
- Black: low pressure
3) Snow Foam Cannon - Quick Connect
The BAR Group Italian made snow foam lance takes things up another notch. All fittings are made from quality brass. The foam agitator within it generates 30% more foam from standard run of the mill foam lances.
4) Snow Foam Shampoo (Optional)
Tested in house to our exacting standards, the Foamstar has been formulated to work most effectively with our snow foam lance. The intense and thick foam generated clings to the paintwork of your vehicle and pulls away dirt and grime. Leave it on for 15 seconds to half a minute and watch the dirt wash away.
Our Foamstar has been specifically formulated to be pH neutral so it won't strip back wax or any sealants.
Note: This product is not a touch-free wash solution (products that offer that capability are acidic in nature whilst ours is pH neutral).
Foamstar Dilution Instructions:
We suggest a dilution factor of 1 part detergent to 4 parts water. So 100ml of solution to another 400ml of water will enable you to thoroughly coat your average sized sedan with foam from top to bottom.